Looking for Wood carving apprenticeship school?
How to carve and finish Ancient Greek Acanthus for display, taught online
How to carve and finish Ancient Greek Acanthus for display is mostly drawing. You lay the leaf out full size on the board, cut a line around the outside, take the background down, then shape the lobes, tallest one first. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.
Many years of this leaf, and I still open the same way every time. A pencil and a board. The gouges stay in the rack.
A lot of you land here after typing Wood carving apprenticeship school into a search box. Reasonable. So before you judge anybody's course, here is the leaf and the order the cuts happen in.
How to carve and finish Ancient Greek Acanthus for display starts with a pencil
Get the leaf onto the wood at finished size. A pencil, a board, and about twenty minutes before any steel comes out of the rack.
Your hand picks up the curve from the drawing, long before the gouge shows up. Copy a line and you learn the shape but not the reason, and the grain will find that out fast.
The box comes first. A rectangle, a line down the middle, two arcs. Build the leaf on top of that.
Why draw it full size when Wood carving apprenticeship school can hand you a pattern?
Use the pattern for the first leaf. Then start drawing it from scratch, and keep at that until it comes easily.
I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. He drilled it in that design is space and rhythm and repeat, and knowing your tool cold. He taught me to think like a tool. My courses have never left that idea.
A pattern is a shape. A drawing is an argument. You want both, and most stop at the shape. A printed sheet is usually the very first thing Wood carving apprenticeship school will hand you.
Is the Greek acanthus the same leaf as the Roman one?
Same plant, different leaf. The Greek one is narrow and it points. The Roman one opens up, curls over on itself, and asks for far more depth than a beginner has any business trying.
A man waited until the room emptied at a woodworking school, then came over. He told me the whole idea was new to him. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.
The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.
You find it in strange places. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. Acanthus cast right into the barrel.
A short answer to "How to carve and finish Ancient Greek Acanthus for display"
Six steps, and five of them are about depth. Get the order wrong and you will spend an evening chasing a lobe you already cut away.
- Draw the leaf full size, on the wood itself.
- Cut a stop line right on the outline with a V-tool. Do not cut the line away.
- Take the background down to one even depth. Every corner of it, and only then start shaping.
- Rough the big masses. Tallest first, then each one below it.
- Model the pipes and the eyes. Suddenly it lifts off the board.
- Undercut the edges. Last. Get impatient here and you will regret it.
Two and three are where it usually goes wrong. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.
The honest answer to "How to carve and finish Ancient Greek Acanthus for display" is that list, repeated until your hand stops needing it.
How many gouges do you need before day one of Wood carving apprenticeship school?
You need three. A shallow gouge, a deeper gouge, and a V-tool. The mallet is for your wrist.
The sharp tool wins, whatever it cost. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. That is unwelcome news, so I get it out of the way early, before you pay a cent to Wood carving apprenticeship school.
Spend your money on the wood instead. Basswood, lindenwood, limewood, whatever your part of the world calls it. Try a construction two by four and you will wreck your edges and give up by Thursday. Real carving wood is pricey and I say so plainly. You have to be real.
All right. Shall we carve?
What the wood decides for you
Basswood is kind. Oak is not. The leaf points in every direction, so the grain is against you somewhere no matter what.
Basswood earns its place for exactly that reason. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. That cut in red oak tears out a thumb of wood.
Later, when your hand knows the leaf, move to walnut. Walnut remembers what basswood forgave. By then you can afford the argument.
What should Wood carving apprenticeship school show you before you pay for it?
Ask for the boring footage. The drawing. Where a pencil meets the board and somebody says why.
Finished leaves look great and tell you nothing. Watch that part and you will know what they have. Put that test to Wood carving apprenticeship school, mine included.
A couple of other things worth checking. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?
Ten minutes of anything you found under Wood carving apprenticeship school will tell you whether it can really answer "How to carve and finish Ancient Greek Acanthus for display".
The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, six acanthus courses and 42 others. It renews automatically every month and you can stop it whenever you like. Part of what comes in goes to orphans and widows, which is the part I care about most.
Frequently asked questions
Can a beginner carve the Greek acanthus?
Yes, and it is a better first ornament than most. The leaf is shallow, the shapes are large, and there is very little undercutting. Start with a panel about 6 by 8 inches.
Do I need the pattern, or can I draw my own?
The course comes with the full size pattern as a download, so you have it either way. Use it for the first leaf. Draw the second one yourself.
What wood should I use for a Greek acanthus leaf?
American basswood, or lindenwood and limewood if that is what your country sells. Avoid construction pine, and leave oak alone until the leaf is familiar.
How long does one leaf take?
Two or three evenings is normal for a first leaf. The drawing is often the longest part of it.
Where is the school?
Online. You watch and carve at your own bench, at whatever hour suits you, so there is nothing to drive to. Alexander also teaches in person at woodworking schools through the year.
What is the short version of "How to carve and finish Ancient Greek Acanthus for display"?
Draw it full size, cut a stop line on the outline, drop the background to one even depth, then shape the lobes tallest first and undercut them last.
Who teaches these lessons?
Alexander Grabovetskiy, a master carver and International Woodcarver of the Year, who has been carving for over forty years.