Looking for Online coaching for wood carving skills?
How to carve decorative borders with Ancient Greek Acanthus, taught online
How to carve decorative borders with Ancient Greek Acanthus is mostly drawing. You lay the leaf on the board at full size, cut the outline in, take the waste out, then shape the lobes high to low. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.
Many years of this leaf, and I still open the same way every time. A pencil and a board. The gouges stay in the rack.
A lot of you land here after typing Online coaching for wood carving skills into a search box. Understood. So let me put the leaf in front of you first, and the order it goes in.
How to carve decorative borders with Ancient Greek Acanthus starts with a pencil
Put a pencil on the board and draw the leaf at the size you mean to carve it. That is the whole instruction.
Drawing the leaf yourself teaches your hand the sweep before any tool arrives. When you trace somebody else's line, your hand learns nothing, and the first time a lobe runs into the grain you will not know which way to turn the tool.
Begin with a rectangle. Put a center line down it, then the two arcs that carry the leaf. Everything else follows.
Why draw it full size when Online coaching for wood carving skills can hand you a pattern?
Take the pattern. Use it. Then draw the same leaf again from scratch, and keep doing that until you can put one down without looking.
I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. Design is not drawing on paper. Design is the laws of space, rhythm and repetition, and knowing what the tool in your hand can and cannot do. He taught me to think like a tool. Everything I teach sits on that one sentence.
A shape comes from the pattern. The reasons come from drawing. Very few people go and get the second half. A printed sheet is usually the very first thing Online coaching for wood carving skills will hand you.
Is the Greek acanthus the same leaf as the Roman one?
One plant, different leaves. Greek is narrow, Roman is broad and folded, and the Roman one is much deeper work.
One of my students at a woodworking school came up when the class broke. He said it had never crossed his mind. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.
The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.
You find it in strange places. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. Right there on the barrel, our leaf.
A short answer to "How to carve decorative borders with Ancient Greek Acanthus"
Six steps in all. Five are about depth, and the order is not optional.
- Draw the leaf full size, on the wood itself.
- Cut a stop line right on the outline with a V-tool. Stay outside the pencil, not on it.
- Take the background down to one even depth. Every corner of it, and only then start shaping.
- Rough the big masses. Start high and come down in stages.
- Model the pipes and the eyes. Flatness goes away in about an hour.
- Undercut the edges. Last. Do it early and you will break something.
Nearly everybody stumbles on two and three. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.
The honest answer to "How to carve decorative borders with Ancient Greek Acanthus" is that list, repeated until your hand stops needing it.
How many gouges do you need before day one of Online coaching for wood carving skills?
Three, and one of them is a V-tool. A shallow gouge for the broad sweeps, something deeper for the pipes and the eyes, and the V-tool for your stop line. A mallet if your wrist is tired of arguing.
Sharp beats expensive, every time. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. People hate hearing it, so I say it up front, before you pay a cent to Online coaching for wood carving skills.
The wood deserves the budget. Basswood, lindenwood, limewood, whatever your part of the world calls it. A construction two by four will destroy your edges and your patience. It costs money, and I would rather say that now. You have to be real.
Well then. Shall we carve?
What the wood decides for you
Basswood forgives. Oak will not. An acanthus is long thin lobes pointing every way, so half your cuts fight the grain however you turn the board.
Hence basswood, and not by accident. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. Red oak answers the same cut with a splinter the length of your thumb.
Later, when your hand knows the leaf, move to walnut. Gorgeous, and it shows up careless work in daylight. By then you can afford the argument.
What should Online coaching for wood carving skills show you before you pay for it?
Ask to see the layout stage, not the finished leaf. The part nobody puts in the trailer.
A finished leaf photographs well and proves nothing. Layout is where you find out whether somebody actually knows this. Put that test to Online coaching for wood carving skills, mine included.
Two other things matter. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?
Ten minutes of anything you found under Online coaching for wood carving skills will tell you whether it can really answer "How to carve decorative borders with Ancient Greek Acanthus".
The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, the whole library, not one corner of it. It renews automatically every month and you can stop it whenever you like. A share of it goes to orphans and widows. That matters more to me than the rest.
Frequently asked questions
Can a beginner carve the Greek acanthus?
Yes, and it is a better first ornament than most. The leaf is shallow, the shapes are large, and there is very little undercutting. Start with a panel about 6 by 8 inches.
Do I need the pattern, or can I draw my own?
The course comes with the full size pattern as a download, so you have it either way. Use it for the first leaf. Draw the second one yourself.
What wood should I use for a Greek acanthus leaf?
American basswood, or lindenwood and limewood if that is what your country sells. Avoid construction pine, and leave oak alone until the leaf is familiar.
How long does one leaf take?
Two or three evenings is normal for a first leaf. The drawing is often the longest part of it.
Where is the school?
Online. You watch and carve at your own bench, at whatever hour suits you, so there is nothing to drive to. Alexander also teaches in person at woodworking schools through the year.
What is the short version of "How to carve decorative borders with Ancient Greek Acanthus"?
Draw it full size, cut a stop line on the outline, drop the background to one even depth, then shape the lobes tallest first and undercut them last.
Who teaches these lessons?
Alexander Grabovetskiy, a master carver and International Woodcarver of the Year, who has been carving for over forty years.