Looking for Introductory courses in relief carving?
How to carve smooth lines in Ancient Greek Acanthus woodwork, taught online
How to carve smooth lines in Ancient Greek Acanthus woodwork is mostly drawing. You lay the leaf out full size on the board, cut a line around the outside, take the background down, then shape the lobes, tallest one first. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.
I have been cutting this leaf for years and the first hour never changes. A pencil and a board. The gouges can wait their turn.
A lot of you land here after typing Introductory courses in relief carving into a search box. Reasonable. So before you judge anybody's course, here is the leaf and the order the cuts happen in.
How to carve smooth lines in Ancient Greek Acanthus woodwork starts with a pencil
Put a pencil on the board and draw the leaf at the size you mean to carve it. That is the whole instruction.
When you draw the leaf, your hand learns the curve ahead of the gouge. When you trace somebody else's line, your hand learns nothing, and the first time a lobe runs into the grain you will not know which way to turn the tool.
Rectangle first, always. Then the middle line, then the two arcs that set the growth.
Why draw it full size when Introductory courses in relief carving can hand you a pattern?
Take the pattern, carve it, and then draw that leaf from nothing until it stops being hard.
I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. Design is not drawing on paper. Design is the laws of space, rhythm and repetition, and knowing what the tool in your hand can and cannot do. He taught me to think like a tool. That one idea is still the whole of my teaching.
The pattern is the outline. The drawing is the understanding. Most carvers settle for the outline. A printed sheet is usually the very first thing Introductory courses in relief carving will hand you.
Is the Greek acanthus the same leaf as the Roman one?
One plant, different leaves. Greek is narrow, Roman is broad and folded, and the Roman one is much deeper work.
A man came up to me after a class I was teaching at a woodworking school. He said he had never once thought about acanthus this way. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.
The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.
Odd places carry this leaf. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. Somebody put acanthus on a cannon.
A short answer to "How to carve smooth lines in Ancient Greek Acanthus woodwork"
Six steps. Five are depth. Do them in the wrong order and you lose an evening to a lobe you already removed.
- Draw the leaf full size, on the wood itself.
- Cut a stop line right on the outline with a V-tool. Cut beside the line, never through it.
- Take the background down to one even depth. Do the whole ground before you shape one thing.
- Rough the big masses. Work from the top lobe downward.
- Model the pipes and the eyes. Now it starts to look carved.
- Undercut the edges. Last. Too early and something comes off in your hand.
The leaf is usually lost at step two or three. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.
The honest answer to "How to carve smooth lines in Ancient Greek Acanthus woodwork" is that list, repeated until your hand stops needing it.
How many gouges do you need before day one of Introductory courses in relief carving?
Three. A shallow gouge for the sweeps, a deeper one for the pipes and eyes, and a V-tool for the stop line. Add a mallet when your wrist complains.
A honed cheap chisel beats a blunt good one. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. It is not what anyone wants, so I say it now, before you pay a cent to Introductory courses in relief carving.
Put the money into wood. Basswood, lindenwood, limewood, whatever your part of the world calls it. A construction two by four will destroy your edges and your patience. Proper wood is not cheap, and pretending it is would be a lie. You have to be real.
If none of that scared you off, shall we carve?
What the wood decides for you
Basswood forgives. Oak will not. An acanthus is long thin lobes pointing every way, so half your cuts fight the grain however you turn the board.
Basswood earns its place for exactly that reason. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. Try the same cut in red oak and it lifts a splinter the length of your thumb.
Later, when your hand knows the leaf, move to walnut. Walnut remembers what basswood forgave. By then you can afford the argument.
What should Introductory courses in relief carving show you before you pay for it?
Ask them for the drawing stage. Skip the finished piece. You want the part where somebody explains why the line sits there.
Anybody can film a finished leaf. You learn everything about a teacher while nothing is being cut. Put that test to Introductory courses in relief carving, mine included.
Two more, then decide. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?
Ten minutes of anything you found under Introductory courses in relief carving will tell you whether it can really answer "How to carve smooth lines in Ancient Greek Acanthus woodwork".
The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, six acanthus courses and 42 others. It renews automatically every month and you can stop it whenever you like. A part goes to orphans and widows. That is the reason I keep doing this.
Frequently asked questions
Can a beginner carve the Greek acanthus?
Yes, and it is a better first ornament than most. The leaf is shallow, the shapes are large, and there is very little undercutting. Start with a panel about 6 by 8 inches.
Do I need the pattern, or can I draw my own?
The course comes with the full size pattern as a download, so you have it either way. Use it for the first leaf. Draw the second one yourself.
What wood should I use for a Greek acanthus leaf?
American basswood, or lindenwood and limewood if that is what your country sells. Avoid construction pine, and leave oak alone until the leaf is familiar.
How long does one leaf take?
Two or three evenings is normal for a first leaf. The drawing is often the longest part of it.
Where is the school?
Online. You watch and carve at your own bench, at whatever hour suits you, so there is nothing to drive to. Alexander also teaches in person at woodworking schools through the year.
What is the short version of "How to carve smooth lines in Ancient Greek Acanthus woodwork"?
Draw it full size, cut a stop line on the outline, drop the background to one even depth, then shape the lobes tallest first and undercut them last.
Who teaches these lessons?
Alexander Grabovetskiy, a master carver and International Woodcarver of the Year, who has been carving for over forty years.