How to carve using power tools for Ancient Greek Acanthus, taught online

How to carve using power tools for Ancient Greek Acanthus is mostly drawing. You lay the leaf out full size on the board, cut a line around the outside, take the background down, then shape the lobes, tallest one first. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.

I keep coming back to this leaf, and the beginning never changes. A pencil and a board. No steel yet.

A lot of you land here after typing School of narrative wood carving into a search box. That is fine. Before you look at what anyone is selling, here is the leaf and how the work runs.

How to carve using power tools for Ancient Greek Acanthus starts with a pencil

Get the leaf onto the wood at finished size. A pencil, a board, and about twenty minutes before any steel comes out of the rack.

A leaf drawn by your own hand puts the curve in your arm before the steel does. Copy a line and you learn the shape but not the reason, and the grain will find that out fast.

Box, center line, arcs. In that order, and the leaf builds itself off them.

Why draw it full size when School of narrative wood carving can hand you a pattern?

The pattern is fine. Use it once, then draw the leaf yourself until your hand has it.

I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. He said design has nothing to do with paper. It is space, rhythm, repetition, and understanding the tool you are holding. He taught me to think like a tool. My courses have never left that idea.

A pattern is a shape. A drawing is an argument. You want both, and most stop at the shape. A printed sheet is usually the very first thing School of narrative wood carving will hand you.

Is the Greek acanthus the same leaf as the Roman one?

Same plant, two shapes. The Greek leaf points. The Roman leaf opens up and turns over on itself.

A man came up to me after a class I was teaching at a woodworking school. He said he had looked at acanthus for years and never seen that. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.

The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.

Buildings are not the half of it. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. On a gun barrel, of all places.

A short answer to "How to carve using power tools for Ancient Greek Acanthus"

Six steps, five of them about depth. Take them out of order and you will hunt a lobe that is no longer there.

1. Draw the leaf full size, on the wood itself.
2. Cut a stop line right on the outline with a V-tool. Cut beside the line, never through it.
3. Take the background down to one even depth. The entire background, level, before anything else.
4. Rough the big masses. The high lobe sets the level for the rest.
5. Model the pipes and the eyes. The shape comes alive under the gouge.
6. Undercut the edges. Last. Leave it late or lose a lobe.

Step two and step three do most of the damage. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.

The honest answer to "How to carve using power tools for Ancient Greek Acanthus" is that list, repeated until your hand stops needing it.

How many gouges do you need before day one of School of narrative wood carving?

Three, and one of them is a V-tool. A shallow gouge for the broad sweeps, something deeper for the pipes and the eyes, and the V-tool for your stop line. A mallet if your wrist is tired of arguing.

The sharp tool wins, whatever it cost. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. Most people do not want to hear that, which is why I say it first, before you pay a cent to School of narrative wood carving.

Buy wood, not another gouge. Basswood, lindenwood, limewood, whatever your part of the world calls it. Carve a construction two by four and you will ruin your edges and quit by Thursday. Carving wood is expensive. That is just true. You have to be real.

If that sounds like your kind of trouble, shall we carve?

What the wood decides for you

Basswood lets mistakes go. Oak keeps them. The lobes run every direction, so some are always against the grain.

The whole case for basswood sits in that one problem. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. Try the same cut in red oak and it lifts a splinter the length of your thumb.

Later, when your hand knows the leaf, move to walnut. Beautiful wood, and it punishes every lazy cut you make. By then you can afford the argument.

What should School of narrative wood carving show you before you pay for it?

Ask to see the layout stage, not the finished leaf. The part nobody puts in the trailer.

Anybody can film a finished leaf. Nobody hides at the layout stage. Put that test to School of narrative wood carving, mine included.

Two other things matter. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?

Ten minutes of anything you found under School of narrative wood carving will tell you whether it can really answer "How to carve using power tools for Ancient Greek Acanthus".

The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, not just the six acanthus courses. It renews automatically every month and you can stop it whenever you like. A part goes to orphans and widows. That is the reason I keep doing this.