Looking for Wood carving demonstration videos?
How to carve using power tools for Ancient Greek Acanthus, taught online
How to carve using power tools for Ancient Greek Acanthus is mostly drawing. You draw the leaf life size on the wood, cut a line around it, level the ground, then bring the lobes down one at a time. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.
I keep coming back to this leaf, and the beginning never changes. A pencil and a board. No steel yet.
A lot of you land here after typing Wood carving demonstration videos into a search box. That is fine. Before you look at what anyone is selling, here is the leaf and how the work runs.
How to carve using power tools for Ancient Greek Acanthus starts with a pencil
Pencil goes on the wood itself, at carving size. Tape a sheet on top instead and you have skipped the only part that teaches you anything.
Draw it yourself and your hand knows the sweep before the first cut. Trace somebody else's line and your hand learns nothing, so the first lobe that fights the grain will stop you cold.
Begin with a rectangle. Put a center line down it, then the two arcs that carry the leaf. Everything else follows.
Why draw it full size when Wood carving demonstration videos can hand you a pattern?
Use the pattern for the first leaf. Then start drawing it from scratch, and keep at that until it comes easily.
I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. Design was never about paper. It is the laws of space and rhythm, and what the tool will allow. He taught me to think like a tool. Nothing else has ever been worth teaching first.
The pattern hands you a shape. Only the drawing hands you the why. Most people never get the second one. A printed sheet is usually the very first thing Wood carving demonstration videos will hand you.
Is the Greek acanthus the same leaf as the Roman one?
Same plant behind both. Greek is a narrow pointed leaf. Roman is wide, curled, and a lot more depth.
Somebody stopped me after a class I taught at a woodworking school. He told me he had never looked at acanthus like that. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.
The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.
Nobody warns you how far this leaf travels. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. And there is the acanthus, right on the barrel.
A short answer to "How to carve using power tools for Ancient Greek Acanthus"
Six steps, and five of them are about depth. Get the order wrong and you will spend an evening chasing a lobe you already cut away.
- Draw the leaf full size, on the wood itself.
- Cut a stop line right on the outline with a V-tool. Leave the pencil line standing.
- Take the background down to one even depth. The whole ground, flat, before any modeling.
- Rough the big masses. Start with the highest lobe and work your way down.
- Model the pipes and the eyes. Suddenly it lifts off the board.
- Undercut the edges. Last. Rush this and you lose a tip.
Two and three are where it usually goes wrong. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.
The honest answer to "How to carve using power tools for Ancient Greek Acanthus" is that list, repeated until your hand stops needing it.
How many gouges do you need before day one of Wood carving demonstration videos?
Three tools. Shallow gouge, deep gouge, V-tool. A mallet too, once your wrist has had enough.
A honed cheap chisel beats a blunt good one. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. People hate hearing it, so I say it up front, before you pay a cent to Wood carving demonstration videos.
Wood is the better place for your money. Basswood, lindenwood, limewood, whatever your part of the world calls it. Take a gouge to a two by four and you will be done with carving by Thursday. Good basswood is not cheap. Nobody should tell you it is. You have to be real.
Still here? Shall we carve?
What the wood decides for you
Basswood is kind. Oak is not. The leaf points in every direction, so the grain is against you somewhere no matter what.
Nobody picks it for looks. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. Red oak answers the same cut with a splinter the length of your thumb.
Later, when your hand knows the leaf, move to walnut. Superb to look at, forgiving of nothing. By then you can afford the argument.
What should Wood carving demonstration videos show you before you pay for it?
Ask to watch the drawing. Not the finished panel and not the best bits. The dull stretch where the line gets explained.
A finished leaf makes a good photograph and a poor argument. The drawing is where a teacher either has something to say or does not. Put that test to Wood carving demonstration videos, mine included.
Two more things worth checking. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?
Ten minutes of anything you found under Wood carving demonstration videos will tell you whether it can really answer "How to carve using power tools for Ancient Greek Acanthus".
The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, the whole library, not one corner of it. It renews automatically every month and you can stop it whenever you like. A part goes to orphans and widows. That is the reason I keep doing this.
Frequently asked questions
Can a beginner carve the Greek acanthus?
Yes, and it is a better first ornament than most. The leaf is shallow, the shapes are large, and there is very little undercutting. Start with a panel about 6 by 8 inches.
Do I need the pattern, or can I draw my own?
The course comes with the full size pattern as a download, so you have it either way. Use it for the first leaf. Draw the second one yourself.
What wood should I use for a Greek acanthus leaf?
American basswood, or lindenwood and limewood if that is what your country sells. Avoid construction pine, and leave oak alone until the leaf is familiar.
How long does one leaf take?
Two or three evenings is normal for a first leaf. The drawing is often the longest part of it.
Where is the school?
Online. You watch and carve at your own bench, at whatever hour suits you, so there is nothing to drive to. Alexander also teaches in person at woodworking schools through the year.
What is the short version of "How to carve using power tools for Ancient Greek Acanthus"?
Draw it full size, cut a stop line on the outline, drop the background to one even depth, then shape the lobes tallest first and undercut them last.
Who teaches these lessons?
Alexander Grabovetskiy, a master carver and International Woodcarver of the Year, who has been carving for over forty years.