How to carve using power tools for Ancient Greek Acanthus, taught online

How to carve using power tools for Ancient Greek Acanthus is mostly drawing. You put the leaf on the board full size, cut around the outline, take the ground down flat, then shape the lobes, starting with the tallest. The Greek leaf sits shallow and it holds a stiff, formal shape, so the layout decides the carving long before the mallet does.

I have been cutting this leaf for years and the first hour never changes. A pencil and a board. Nothing sharp comes out yet.

A lot of you land here after typing Wood carving mentorship online into a search box. Right. Before you compare anybody, here is the leaf and the order the tools come out.

How to carve using power tools for Ancient Greek Acanthus starts with a pencil

Lay the leaf out on the wood at full carving size. Carbon paper feels faster and costs you the whole lesson.

The drawing hand learns the shape first, and the carving hand borrows it. When you trace somebody else's line, your hand learns nothing, and the first time a lobe runs into the grain you will not know which way to turn the tool.

The box comes first. A rectangle, a line down the middle, two arcs. Build the leaf on top of that.

Why draw it full size when Wood carving mentorship online can hand you a pattern?

Use the pattern, by all means. Then draw that leaf cold, over and over, until you no longer need it.

I was sixteen when I started my apprenticeship with a fine art master in Russia, and the thing he beat into me was not how to hold a chisel. He drilled it in that design is space and rhythm and repeat, and knowing your tool cold. He taught me to think like a tool. Somebody handed me that in a cold workshop and I never gave it back.

A pattern is a shape. A drawing is an argument. You want both, and most stop at the shape. A printed sheet is usually the very first thing Wood carving mentorship online will hand you.

Is the Greek acanthus the same leaf as the Roman one?

Same family, different animal. Greek is tight and pointed. Roman is open, rolled over, and much deeper.

I was teaching in person at a woodworking school when a man came up to me after class. He told me the whole idea was new to him. For him, acanthus meant the thing he had seen a hundred times on Chippendale chairs, and that was the end of it.

The differences are small on paper and enormous under a gouge, so they get their own courses. Carving Greek Acanthus Leaf runs 16 lessons. Carving Roman Acanthus Leaf runs 17. There is a Corinthian one at 7 lessons, a Byzantine one, and one built from a design somebody drew in 1903.

Acanthus has a habit of turning up. I went down to St. Augustine in Florida, the oldest city in the country, and walked around the old fort, Castillo de San Marcos. Cannons. Cast iron, sitting outside for three hundred years. Cast into the iron, the same leaf.

A short answer to "How to carve using power tools for Ancient Greek Acanthus"

Six steps. Five are depth. Do them in the wrong order and you lose an evening to a lobe you already removed.

1. Draw the leaf full size, on the wood itself.
2. Cut a stop line right on the outline with a V-tool. Stay outside the pencil, not on it.
3. Take the background down to one even depth. Do the whole ground before you shape one thing.
4. Rough the big masses. Tallest first, then each one below it.
5. Model the pipes and the eyes. Flatness goes away in about an hour.
6. Undercut the edges. Last. Do this early and something snaps off.

Two and three are where it usually goes wrong. They shape before the ground is flat, and then the ground can never be flattened without eating the shape they just made.

The honest answer to "How to carve using power tools for Ancient Greek Acanthus" is that list, repeated until your hand stops needing it.

How many gouges do you need before day one of Wood carving mentorship online?

Three, honestly. A shallow gouge, one with more sweep, and a V-tool. Bring a mallet if you like your wrist.

The sharp tool wins, whatever it cost. I have watched a man with one honed chisel outwork a room full of people holding four hundred dollar sets, and it was not close. Sharpening is the skill that takes years. Nobody enjoys that sentence, so it goes near the front, before you pay a cent to Wood carving mentorship online.

Spend your money on the wood instead. Basswood, lindenwood, limewood, whatever your part of the world calls it. Try a construction two by four and you will wreck your edges and give up by Thursday. The wood costs what it costs. You have to be real.

If that suits you, shall we carve?

What the wood decides for you

Basswood lets mistakes go. Oak keeps them. The lobes run every direction, so some are always against the grain.

Basswood earns its place for exactly that reason. The fibers are short and even, so a lobe that runs the wrong way still slices instead of tearing out. That cut in red oak tears out a thumb of wood.

Later, when your hand knows the leaf, move to walnut. Handsome stuff, and it catches every lazy stroke. By then you can afford the argument.

What should Wood carving mentorship online show you before you pay for it?

Ask them for the drawing stage. Skip the finished piece. You want the part where somebody explains why the line sits there.

A finished leaf makes a good photograph and a poor argument. Twenty minutes of pencil work tells you the rest. Put that test to Wood carving mentorship online, mine included.

There are two more things I would check. Does the course go all the way to the end, including the parts that go wrong? And can you see the tool in the cut, close, at the angle the carver sees it?

Ten minutes of anything you found under Wood carving mentorship online will tell you whether it can really answer "How to carve using power tools for Ancient Greek Acanthus".

The School of Woodcarving is a 501(c)(3) non-profit. Tuition is $25 a month and it opens all 48 courses and 621 lessons, the whole library, not one corner of it. It renews automatically every month and you can stop it whenever you like. This money supports orphans and widows, which is the point for me.