The apprenticeship I got at sixteen, rebuilt so it reaches a bench in Avenel, NJ

When you search for Woodcarving Tutorials near Avenel, NJ, the map comes back empty. No carving shop in your town is taking students, and I'm not going to pretend one is. Everything I teach runs online, out of my shop and onto your bench.

You stand over a clean board knowing roughly what should come out of it, and you have no idea where to begin carving. Hundreds of people have described that exact moment to me. Is your gouge properly sharp right now, today, without you having to go and check? Then you already know the part nobody says out loud.

My name is Alexander Grabovetskiy. Over forty years at the bench, one International Woodcarver of the Year award, and plenty of architectural ornament in houses you would recognize. Keep reading for what happened to me at sixteen, though, because at sixteen I was handed something money mostly cannot buy any more, and I have spent years rebuilding it so it reaches a bench in Avenel, NJ.

Plenty of people live twenty minutes from a good school and still have not started, because the thing that stops us is almost never geography.

What I got at sixteen that you cannot buy in Avenel, NJ

I was one apprentice with one master. One bench, one man watching my hands, every day, for years. He could see the carving going wrong before the edge ever reached the wood, and he would stop me mid stroke. Everything since has been a copy of it.

Here is the part that surprised me then and still surprises my students. He did not hand me a gouge on the first day. Paper came first, and a pencil. Design first, he said, and design to him had nothing to do with drawing something pretty. He meant the laws of space. Rhythm. Repetition. How one curve has to answer another or the whole panel looks wrong and nobody can say why. Design, then carving, then sharpening. Always that way round.

My grandfather gave me my first chisel when I was six years old. I took it straight to a brick, tried to carve a face into the brick, and destroyed the tool inside a minute. He never raised his voice about it. Somewhere in that year something started that has never let go.

The videos stop at the finished leaf

They show you the result. The carving is the lesson, and the carving is what the camera missed. A camera parked across the room shows a man leaning over a board and, eight minutes later, an acanthus leaf. Fifty videos later, you are still stalled.

The bottleneck sits somewhere else entirely. Most people quit somewhere in week three, and week three is a drawing problem wearing a carving costume.

Ask me how I know.

Woodcarving Tutorials in Avenel, NJ, start to finish

So I rebuilt the apprenticeship and put the camera where my master's eyes were. Over the shoulder. Close enough to watch the bevel ride the wood. I built a virtual apprenticeship, and I mean that word literally rather than as a phrase for a headline.

Behind one login sit 46 courses, 619 lessons and 3,039 separate parts, and they run in the order my master used. Design comes first, in Principles of Design in Wood Carving. Carving second. Sharpening last and hardest, in Carving Tool Sharpening, the course people put off for a year and then write to me about. If you have never held a gouge, Beginner in Carving is the door, and it runs 17 lessons on its own.

Half speed, if that is what it takes.

That is what I mean by Woodcarving Tutorials. A way of being taught that copies what was done to me, one lesson at a time, in an order somebody chose on purpose. I got that order wrong the first time I built it. Sharpening sat at the front, because sharpening seemed like the sensible place to start, and people drowned in it and left. Moving it to the end helped. I am still not sure the design course sits where it should.

Design, carving, sharpening. Keep it in that order.

Each part carries a place to write notes against the video, and you can grab a still from the exact frame where my hand is at the angle you keep missing. Students print those and tape them above the bench. Paper on the wall beats a phone that locks itself every thirty seconds and needs a clean thumb to wake up.

How long does it take to learn to carve?

Give it a month of real evenings and you will carve clean, controlled shapes in basswood. A year in, people start asking who made that. I'm not going to sell you speed. You can't hurry the part where your hands stop arguing.

The first weeks look roughly like this, and the order matters more than the pace.

• Week one is paper, which annoys almost everybody, and straight practice carving that goes nowhere near a finished thing.
• Then a simple moulding profile in week two, and it looks bad. Carve it again.
• Week three it looks better, and you feel the difference in your hand before you see it in the wood.
• By week five or six you stop the tool exactly where you meant to stop it, which is the whole game, and everything after that is scale.

A man who carved every night beat one who carved every Saturday, which surprised neither of us.

Something you can do tonight, whether you ever pay me or not

Strop your gouge before you sharpen it. Most edges that feel dull are not dull at all, they are folded over, and a strop stands that wire back up in about forty seconds. Take a scrap of leather, glue it flat to a board, rub in green honing compound. Pull the tool backwards along it, bevel flat to the leather, twenty strokes, rolling the gouge as you go so the whole curve touches. Then test it by paring across the end grain of a pine offcut, because your thumbnail lies and end grain tells the truth. A sharp edge is quiet. The folded one squeaks, and you'll know the difference the moment you have heard it once.

That one is free and it is yours, and it fixes more frustration than any tool you could buy this month. If it works on your bench tonight, shall we carve?

What wood can you actually get around Avenel, NJ?

Basswood, and it is worth ordering ahead instead of taking whatever the lumber yard has stacked by the door. New Jersey has good hardwood dealers and plenty of black walnut and cherry within driving distance, and both are fine wood for a carver who already has hands.

Wood	How it carves	When to use it
Basswood	Soft and even, forgives a bad angle	Your first year, and every practice panel after
Butternut	Harder, and it holds a real color	The first piece you actually want to keep, once the practice boards stop embarrassing you
Black walnut	Hard, and the grain changes direction on you	Once your edge holds and your layout is right

Soft even grain lets you feel what the edge is doing, and that feedback is the entire reason it is the teaching wood in every carving school on earth. And whatever you carve, don't carve a construction 2x4. You will fight the grain, kill your edge, and decide you are no good at this, when the truth is you picked a fight with kiln dried pine that nobody wins. Nobody has ever shown you where to put the edge. The tree it came from had nothing to do with any of it.

Looking for Woodcarving Tutorials near you, and what a weekend really costs

I do teach in person, and I'll say plainly that it isn't enough. Those classes sell out in eight minutes. Eight minutes. A few dozen people get in, they get two or three days with me, and then they go home and the real questions start arriving the following week, when there is nobody standing there to answer them. Craft does not fit inside a weekend, however good the weekend was.

Distance is only one of the walls, and for many people it is not even the tallest one.

A workbench in Avenel, NJ and the one I am standing at can run the same lesson on the same evening. Same lesson, same evening. That is the only geography this craft has left. It took me a long time and a lot of camera angles to believe it.

What it costs, and who should not pay me for Woodcarving Tutorials

Tuition is $25 a month, or $200 for the year, and it renews automatically every month or every 12 months until you cancel it yourself on your account page. Nothing to post, nobody to phone.

Before you spend money on Woodcarving Tutorials anywhere, including here, add up what a weekend elsewhere really costs. Go anyway if you can afford it. A Saturday beside another carver is worth the hotel.

If $25 a month is a real problem in your house this month, then this is not the right hobby for you yet, and I'd rather say so than take the money. Get a pencil and paper and draw instead. Drawing is free. Come back when the wood and the tools will not hurt anybody at home. Wood is not going anywhere.

The school is a non-profit. Tuition pays for filming and for the site, and what is left funds orphans and widows and buys art lessons for children whose families cannot pay for them. When my father left us there was no money for anything of that kind, so that line means something to me.

The scarce thing is somebody who knows why your carving failed.

Who sits at the other benches

Retired machinists. Cabinet makers who got tired of building boxes. A design teacher who does an impression of my accent for the whole room. People in their seventies who have wanted this since they were twelve. Somebody in there is older than you.

I never set out to teach. Selling my Felder machines was meant to buy me time to carve full time, and then a man called Mark Adams asked me to take a class, and I was so frightened of my English that I nearly said no. Yes came out instead. That was seven years ago and it changed what I do with my life. When I carve alone now I put on Bach or Vivaldi, and some days a university lecture instead, and I've finished whole college courses that way with a mallet in my hand.

So I show my own mistakes on camera and leave them in.

The gift you have for the three dimensional world was not given to you so you could spend it on a phone. Work on it. And before you decide anything about me, go and do the strop and the pine offcut tonight, on a bench in Avenel, NJ, because that part costs you nothing and it will tell you more about your own edge than I can from here.