Learn wood carving at your own bench in Hamilton, TX

I teach Wood Carving Classes online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. You will not find a bench of mine anywhere in Hamilton, TX. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever look at a clean panel and know a leaf belongs in it? When you searched for Wood Carving Classes near Hamilton, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. That award is not why I am worth your time. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Hamilton, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. Books never came into it. He worked and I watched from a foot away, then it was my turn. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

He built the carver I am. You cannot buy that in Hamilton, TX. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

My tools were gone. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Skip the sympathy, it is useless to both of us. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. Anybody can find a tool. Almost nobody finds a teacher.

Why the videos have not taught you to carve yet

Students tell me this same story most weeks of the year, and it always starts the same way and ends the same way. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

Something quite different was going on. You were shown the RESULT of a cut. Nobody showed you the cut itself. You saw a carver, and a leaf, and nothing in between. You cannot copy what you were not allowed to see. Every person who ever typed Wood Carving Classes into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. You get one demonstration, from wherever you happen to be standing. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

I gave the camera his job. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And it never gets tired of showing you. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood Carving Classes on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. First the drawing, and yes, that is the unpopular answer. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. Hand a beginner a properly honed gouge and watch what happens. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

The order matters, and I have seen the cost of ignoring it. A man buys tools first, copies a pattern second, and never learns to draw at all. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. The answer is that it is a copy, and copies always look like copies. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. Every one of them is a cut filmed the way I needed it filmed.

Your first month of Wood Carving Classes, honestly

My expectation of you in four weeks runs like this. Week one you draw. No cutting at all, and most people hate that week.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. At the end of the month you are holding something you cut yourself. Yours will be a bit clumsy. Mine was worse. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Speed is the one thing I cannot sell you. Sharpening alone took me years to learn properly. But the order is what saves you the wasted years.

Something for you right now, whether you ever pay me or not

I want you to have this either way. Find a scrap of leather, an old belt will do, and glue it to a flat board. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. If it gleams, your bevel is true and you should hold onto that feeling. A fuzzy surface means your bevel is rounded, and no new tool will fix that. Nothing costs my students more, and nothing is cheaper to avoid.

The wood around Hamilton, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. A beginner feels every extra pound of it in the shoulder. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

Lumber advice ends there. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood Carving Classes should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Standing at a bench with eight people around me is one of the best parts of this work, and I would do far more of it if the shop let me. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

Three days of me cannot replace three hundred evenings of you. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood Carving Classes that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. The plan renews automatically month by month, and you shut it off yourself, no email needed. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Cash first, tools second, and I would rather say so than take it. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Weigh it against the alternative for a second. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. You come home with three days of teaching and a sore back. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood Carving Classes

The spread is wider than any classroom I ever stood in. People who make things for a living, and people who never have.

My ninety year old students are sharp, and it is not luck. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Reading depth and shadow all evening is real exercise for your head. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

Carvers are a real group with real standards, and I hold you to them. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. That was me.

So here is what I am really offering you. Not videos. My teacher's method, filmed from his angle, waiting in Hamilton, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

Should that sound like a burden rather than a pleasure, this is not for you, and I would rather you knew. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.