Learn wood carving at your own bench in Detroit, TX

I teach Wood Carving instructions online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. I am not in Detroit, TX and I will not pretend to be. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever set a board on the bench and want to see what it hides? When you searched for Wood Carving instructions near Detroit, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. I did not open with that to impress you. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Detroit, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. He gave me no notes at all. He worked and I watched from a foot away, then it was my turn. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

What I know, I know because of him. Try to hire it in Detroit, TX and see how far you get. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then life took the bench away from me for a while. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Sympathy is not why I am telling you that. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. My tools were garbage and the carvings were sold anyway.

Why the videos have not taught you to carve yet

The road here usually runs through a failed evening at somebody's kitchen table. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

What went wrong is not what you think. You were shown the RESULT of a cut. Nobody showed you the cut itself. The angle of the tool was hidden behind his knuckles the entire time. You cannot copy what you were not allowed to see. Every person who ever typed Wood Carving instructions into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. You get one demonstration, from wherever you happen to be standing. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

So I put the camera where my master's eyes were. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And the tenth repeat costs you nothing. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood Carving instructions on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. You draw before you cut. It is not negotiable with me. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. Clean cuts look like skill, and only sharp tools cut clean. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

Too many carvers reach me having done this in the wrong order. First the shopping, then the copying, and the thinking never arrives. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. The answer is that it is a copy, and copies always look like copies. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. It is the same road he walked me down, only you can walk it at your own speed.

Your first month of Wood Carving instructions, honestly

Here is what your first four weeks actually look like. Week one you draw. Just drawing, and it is the week that decides everything after.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. By week four there is a carved leaf on your bench that you made. You will see everything wrong with it. Do not throw it out. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

You will not be good in a month. Nobody is. Sharpening alone took me years to learn properly. But the order is what saves you the wasted years.

Something for you right now, whether you ever pay me or not

Let me hand you something useful before you close the page. Glue hide to wood. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. Shiny means you are there. A fuzzy surface means your bevel is rounded, and no new tool will fix that. Do not go shopping. Go stropping.

The wood around Detroit, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. The hard stuff takes effort you have not got to spare yet, and gives back nothing at all while your hand is still learning where an edge wants to go. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

And that is all the wood talk you will get from me here. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood Carving instructions should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Face to face teaching still happens, and I love it. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

Two days beside me cannot do what two years at your own bench does. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood Carving instructions that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. It charges automatically once a month, and the off switch is in your account. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

And if money is your biggest problem right now, this is probably not the right hobby yet. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Set it beside what a live class costs you. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. And on Monday there is nobody left to ask. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood Carving instructions

Every decade you can name shows up eventually. Cabinet makers who can build anything and cannot decorate it, restorers, retired engineers, and people who simply want one beautiful thing in the house.

One more reason, and it is the one I did not see coming. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. You are holding a shape in your head and cutting toward it, and that is hard mental work. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

We are a trade with standards, not a craft club. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. My own family could not have found the money if they had wanted to, and that is a thing I have never once forgotten.

So here is what I am really offering you. Not videos. The thing I could not have bought at any price, handed to you in Detroit, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

Carving is not for everybody, and you will get no argument from me. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.