Learn wood carving at your own bench in Gonzales, TX

I teach Wood Carving instructions online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. My shop is a long way from Gonzales, TX, and I am not going to hide it. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever pick up a plank and wonder what is inside it? When you searched for Wood Carving instructions near Gonzales, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. Awards are the least interesting thing I own. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Gonzales, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. He gave me no notes at all. He cut, I cut, he told me what I did wrong. Then again the next morning, and the morning after that. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

Everything I can do came out of those years. Nobody sells it near you, at any price. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then I lost the bench for a few years. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Skip the sympathy, it is useless to both of us. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. The tools were nothing. The teaching was everything.

Why the videos have not taught you to carve yet

Students tell me this same story most weeks of the year, and it always starts the same way and ends the same way. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

Nothing about that was your fault. You were shown the RESULT of a cut. Nobody showed you the cut itself. You watched a person and a product. The work happened in the gap. You cannot copy what you were not allowed to see. Every person who ever typed Wood Carving instructions into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. The nearest pair of eyes learns the angle. The others learn nothing. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

It lives over my shoulder now and never leaves the edge. You see the bevel, the grain and the chip lifting, blown up across your whole screen. Stop it, back it up, watch it once more. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood Carving instructions on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. First a pencil, then a gouge. He would not let me skip it and neither will I. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. A sharp tool makes a beginner look talented. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

The sequence is not my preference. Getting it right wins you years. Getting it wrong loses them. Steel first, pattern second, and no design ever. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. He learned the hand and never the eye. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. What took me years of standing at his elbow is sitting there waiting for you.

Your first month of Wood Carving instructions, honestly

Here is what your first four weeks actually look like. Week one you draw. You will not touch a gouge, and you will not enjoy it.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. Four weeks in, something small and real exists that did not before. You will see everything wrong with it. Do not throw it out. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Nobody gets fast at this, and I will not pretend otherwise. Sharpening alone took me years to learn properly. Inside a year you will pass a lot of self taught carvers.

Something for you right now, whether you ever pay me or not

I am going to give you one true thing before you decide anything. Glue hide to wood. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. If the surface comes off shiny, you have just felt what sharp actually means. A fuzzy surface means your bevel is rounded, and no new tool will fix that. More money on steel is the wrong answer nine times in ten.

The wood around Gonzales, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. Same lesson. Four times the sweat. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

I will stop there, because wood is not your real problem. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood Carving instructions should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Standing at a bench with eight people around me is one of the best parts of this work, and I would do far more of it if the shop let me. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

I can fill your head in a weekend. Only repetition fills your hands. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood Carving instructions that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. Automatically renewed each month, and ended by you the moment you decide. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

If the budget is the wall, do not force it this year. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

The comparison is worth thirty seconds of your time. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. What you carry home is one long weekend and a lot of notes. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood Carving instructions

My students start at fourteen years old and run past ninety. Furniture makers, restorers, church volunteers, and beginners who have never held a gouge.

My ninety year old students are sharp, and it is not luck. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Reading depth and shadow all evening is real exercise for your head. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

Carvers are a real group with real standards, and I hold you to them. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. That was me.

So here is what I am really offering you. Not videos. The thing that made me, taken apart and filmed so it can reach your bench in Gonzales, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

Should that sound like a burden rather than a pleasure, this is not for you, and I would rather you knew. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.