Learn wood carving at your own bench in Argyle, TX

I teach Wood Carving Lessons online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. My shop is a long way from Argyle, TX, and I am not going to hide it. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Somebody hands you a piece of lumber and something in you wants to cut into it. When you searched for Wood Carving Lessons near Argyle, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. Awards are the least interesting thing I own. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Argyle, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. He handed me nothing to read, ever. He showed me, I copied him, he fixed what was wrong. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

Without him I would be a man with a chisel and no idea. Try to hire it in Argyle, TX and see how far you get. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then I lost the bench for a few years. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Sympathy is the last thing I am after here. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. The method survived when everything else was taken.

Why the videos have not taught you to carve yet

You have watched a few of them already. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

Nothing about that was your fault. You were shown the RESULT of a cut. Nobody showed you the cut itself. What you needed to see was the last inch of steel, and that never appeared. You cannot copy what you were not allowed to see. Every person who ever typed Wood Carving Lessons into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. The master cuts once and the back row sees a shoulder. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

So I put the camera where my master's eyes were. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And the tenth repeat costs you nothing. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood Carving Lessons on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. Design, then carving, then sharpening. In that order. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. Sharp steel flatters whoever is holding it. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

I care about the order because I have watched what happens without it. They own beautiful tools and can only reproduce other people's work. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. The reason is simple. He never owned the leaf. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. It is the same road he walked me down, only you can walk it at your own speed.

Your first month of Wood Carving Lessons, honestly

Let me tell you exactly what happens if you start with me tonight. Week one you draw. A pencil and a lot of bad leaves. Welcome to week one.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. Week four you finish something small enough to hold in one hand. Mistakes will be all over it, and I want you to keep it anyway. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

The work is slow and I would be lying to promise speed. Sharpening alone took me years to learn properly. But a month of the real method puts you past years of guessing.

Something for you right now, whether you ever pay me or not

I am going to give you one true thing before you decide anything. Take whatever soft material you have and fix it to a board so it cannot slide. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. A polished surface is the answer you want. A fuzzy surface means your bevel is rounded, and no new tool will fix that. Students spend hundreds on steel when the fault was never the steel.

The wood around Argyle, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. The hard stuff takes effort you have not got to spare yet, and gives back nothing at all while your hand is still learning where an edge wants to go. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

One paragraph is all the wood advice worth giving a beginner. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood Carving Lessons should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Standing at a bench with eight people around me is one of the best parts of this work, and I would do far more of it if the shop let me. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

Three days of me cannot replace three hundred evenings of you. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood Carving Lessons that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. Every month it renews automatically, and every month you can end it. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Wait a while if the money is not there. Nobody is going anywhere. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Do the arithmetic, because it is not close. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. Seventy two hours, and then the door closes. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood Carving Lessons

The youngest is a teenager. Cabinet makers who can build anything and cannot decorate it, restorers, retired engineers, and people who simply want one beautiful thing in the house.

There is one more thing I want you to know, and it has nothing to do with ornament. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Watching a screen does none of this. Cutting toward a shape does all of it. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

We hold each other to the old standard, and I will hold you to it too. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. I was one of those children.

So here is what I am really offering you. Not videos. The thing I could not have bought at any price, handed to you in Argyle, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

If it sounds like too much, that is a fair answer and I respect it entirely. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.