Learn wood carving at your own bench in Del Rio, TX

I teach Wood carving Masterclass online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. There is no address of mine in Del Rio, TX and there never was. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever set a board on the bench and want to see what it hides? When you searched for Wood carving Masterclass near Del Rio, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. I did not open with that to impress you. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Del Rio, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. He never once told me to go read something. He held my wrist and showed the angle. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

What I know, I know because of him. Nowhere in Del Rio, TX is that sitting on a shelf. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then I lost the bench for a few years. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Skip the sympathy, it is useless to both of us. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. Bad tools, real training, and the work still came out.

Why the videos have not taught you to carve yet

The road here usually runs through a failed evening at somebody's kitchen table. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

The problem is in the camera, not in you. You were shown the RESULT of a cut. Nobody showed you the cut itself. The whole lesson lives in the bevel, and the bevel was off camera. You cannot copy what you were not allowed to see. Every person who ever typed Wood carving Masterclass into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. He does it once. You cannot ask him to do it again forty times. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

The camera moved to the only place that teaches, right above the work. You see the bevel, the grain and the chip lifting, blown up across your whole screen. Run it back as many times as you need. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood carving Masterclass on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. First a pencil, then a gouge. He would not let me skip it and neither will I. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. The edge is what people mistake for talent. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

I know what the wrong order does, because it walks into my classes. A man buys tools first, copies a pattern second, and never learns to draw at all. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. He can cut anything and choose nothing. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 618 lessons and 3,036 video parts. Those are not videos to browse. They are the method, in order.

Your first month of Wood carving Masterclass, honestly

Here is what your first four weeks actually look like. Week one you draw. Nothing but a pencil, and it feels like a waste until it does not.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. Four weeks in, something small and real exists that did not before. You will see everything wrong with it. Do not throw it out. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Anyone promising you a shortcut is selling something. Sharpening alone took me years to learn properly. Inside a year you will pass a lot of self taught carvers.

Something for you right now, whether you ever pay me or not

This is yours whether you join me or not. You want something soft and flat to charge with compound, and the back of an old belt does the job, or an offcut from a shoe repair shop. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. Shiny surface, and you now know what I mean by sharp. A fuzzy surface means your bevel is rounded, and no new tool will fix that. Nothing costs my students more, and nothing is cheaper to avoid.

The wood around Del Rio, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. You will push far harder to learn exactly the same thing, and your edge pays for all of it. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

So much for lumber. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood carving Masterclass should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. A handful of dates a year, no more, and never on a calendar I control. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

I can fill your head in a weekend. Only repetition fills your hands. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood carving Masterclass that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. The plan renews automatically month by month, and you shut it off yourself, no email needed. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Steel costs money and pretending otherwise would be a lie. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Set it beside what a live class costs you. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. A wonderful weekend, and no Tuesday. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood carving Masterclass

Ages here surprise people. Joiners, turners, restorers, and complete beginners, side by side.

And here is a benefit nobody mentions when they sell you a class. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Reading depth and shadow all evening is real exercise for your head. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

We are a trade with standards, not a craft club. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. My own family could not have found the money if they had wanted to, and that is a thing I have never once forgotten.

So here is what I am really offering you. Not videos. The thing I could not have bought at any price, handed to you in Del Rio, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

Take the sharpening advice and go well, either way. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.