Learn wood carving at your own bench in Burnet, TX

I teach Wood carving Workshops online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. There is no address of mine in Burnet, TX and there never was. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Have you put your hand on a rough board and felt something waiting there? When you searched for Wood carving Workshops near Burnet, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. That award is not why I am worth your time. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Burnet, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. He handed me nothing to read, ever. He made me watch one cut, then do it, then do it again. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

What I know, I know because of him. That kind of teaching has almost vanished. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then the world had other plans. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Now the part that has to do with you. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. The method survived when everything else was taken.

Why the videos have not taught you to carve yet

Students tell me this same story most weeks of the year, and it always starts the same way and ends the same way. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

The reason is simple and nobody says it out loud. You were shown the RESULT of a cut. Nobody showed you the cut itself. What you needed to see was the last inch of steel, and that never appeared. You cannot copy what you were not allowed to see. Every person who ever typed Wood carving Workshops into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. You get one demonstration, from wherever you happen to be standing. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

My shot looks down the tool, the way he looked down mine. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And nobody sighs when you play it again. My master could not do that for me. He was one man with one afternoon. That is the difference between Wood carving Workshops on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. Design comes first, and it is the part students argue with me about. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. Honed steel hides a great deal of inexperience. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

The sequence is not my preference. Getting it right wins you years. Getting it wrong loses them. A man buys tools first, copies a pattern second, and never learns to draw at all. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. He learned the hand and never the eye. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. Four decades of bench work sit there, laid out in the order it should be learned.

Your first month of Wood carving Workshops, honestly

Let me be exact about this. The first month goes like so. Week one you draw. Pencil only, and I know that is not what you came for.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. By the fourth week you have finished a piece worth keeping. Nobody's first leaf is any good, including mine. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Slow is the honest word for this. Sharpening alone took me years to learn properly. Inside a year you will pass a lot of self taught carvers.

Something for you right now, whether you ever pay me or not

Let me hand you something useful before you close the page. A strop is a piece of leather stuck to something flat. Nothing more. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. When it shines, stop and remember what your hands just did. A fuzzy surface means your bevel is rounded, and no new tool will fix that. More money on steel is the wrong answer nine times in ten.

The wood around Burnet, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. That gap is why your first year belongs to the soft one. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

One paragraph is all the wood advice worth giving a beginner. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Wood carving Workshops should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Those weekends happen when somebody organizes a room and a bench for me. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

I can fill your head in a weekend. Only repetition fills your hands. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Wood carving Workshops that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. Every month it renews automatically, and every month you can end it. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Money tight? Then hold off, and I mean that kindly. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Do the arithmetic, because it is not close. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. You come home with three days of teaching and a sore back. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Wood carving Workshops

Teenagers, and great grandfathers. Furniture makers, restorers, church volunteers, and beginners who have never held a gouge.

Something else happens to you at the bench, and I did not expect it either. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. You keep a whole form in your mind and remove wood until it matches. Nothing else I know does that. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

Carving has rules, and the people here keep them. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. I was one of those children.

So here is what I am really offering you. Not videos. The thing I could not have bought at any price, handed to you in Burnet, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

And if it does not, close this page with my blessing. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.