Learn wood carving at your own bench in Deanville, TX

I teach Woodcarving instructions online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. No room of mine sits in Deanville, TX, and you deserve to know that in the first ten seconds. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever set a board on the bench and want to see what it hides? When you searched for Woodcarving instructions near Deanville, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. I did not open with that to impress you. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Deanville, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. Not one page of theory came my way. He put my hand on the tool and moved it. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

I owe every cut I make to that man. That kind of teaching has almost vanished. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then life took the bench away from me for a while. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

That part is not about me at all. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. Give me a nail and a teacher's voice in my head and I can work.

Why the videos have not taught you to carve yet

Students tell me this same story most weeks of the year, and it always starts the same way and ends the same way. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

The fault is in how it was filmed. You were shown the RESULT of a cut. Nobody showed you the cut itself. Everything that mattered was under his hand. You cannot copy what you were not allowed to see. Every person who ever typed Woodcarving instructions into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. You get one demonstration, from wherever you happen to be standing. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

Now I film from the carver's side of the bench, not from in front of it. You see the bevel, the grain and the chip lifting, blown up across your whole screen. Stop it, back it up, watch it once more. My master could not do that for me. He was one man with one afternoon. That is the difference between Woodcarving instructions on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. Design comes first, and it is the part students argue with me about. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. The edge is what people mistake for talent. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

My strictness about the order comes from watching it play out many times. Tools, then tracing, and design gets skipped forever. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. He can cut anything and choose nothing. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. What took me years of standing at his elbow is sitting there waiting for you.

Your first month of Woodcarving instructions, honestly

Let me be exact about this. The first month goes like so. Week one you draw. Just drawing, and it is the week that decides everything after.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. By week four there is a carved leaf on your bench that you made. Nobody's first leaf is any good, including mine. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Nobody gets fast at this, and I will not pretend otherwise. Sharpening alone took me years to learn properly. Inside a year you will pass a lot of self taught carvers.

Something for you right now, whether you ever pay me or not

This is yours whether you join me or not. Take whatever soft material you have and fix it to a board so it cannot slide. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. Shiny surface, and you now know what I mean by sharp. A fuzzy surface means your bevel is rounded, and no new tool will fix that. More money on steel is the wrong answer nine times in ten.

The wood around Deanville, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. That gap is why your first year belongs to the soft one. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

So much for lumber. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Woodcarving instructions should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Not often. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

I can fill your head in a weekend. Only repetition fills your hands. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Woodcarving instructions that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. Automatically renewed each month, and ended by you the moment you decide. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Should cost be the real obstacle, be honest with yourself and wait. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

The comparison is worth thirty seconds of your time. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. Seventy two hours, and then the door closes. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Woodcarving instructions

My students start at fourteen years old and run past ninety. Professionals sharpening up and beginners starting cold.

And here is a benefit nobody mentions when they sell you a class. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Every evening you solve a solid problem with your hands. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

Carving has rules, and the people here keep them. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. I could not pay for mine either, when my father left us.

So here is what I am really offering you. Not videos. The apprenticeship I was given at sixteen, rebuilt so it reaches Deanville, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

And if it does not, close this page with my blessing. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.