Learn wood carving at your own bench in Albany, TX

I teach Woodcarving Masterclass online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. Nothing of mine stands in Albany, TX. Let me say that before anything else. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Ever pick up a plank and wonder what is inside it? When you searched for Woodcarving Masterclass near Albany, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. Awards are the least interesting thing I own. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Albany, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. There was no course and no schedule. He stood over my shoulder and corrected the angle with his thumb. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

He built the carver I am. That kind of teaching has almost vanished. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

For a long stretch there was no shop at all. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

I tell you that for one reason only. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. Give me a nail and a teacher's voice in my head and I can work.

Why the videos have not taught you to carve yet

Most people arrive at my door on the second or third try. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

The fault is in how it was filmed. You were shown the RESULT of a cut. Nobody showed you the cut itself. The whole lesson lives in the bevel, and the bevel was off camera. You cannot copy what you were not allowed to see. Every person who ever typed Woodcarving Masterclass into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. Eleven people, one pair of hands, one chance to see it. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

It lives over my shoulder now and never leaves the edge. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And nobody sighs when you play it again. My master could not do that for me. He was one man with one afternoon. That is the difference between Woodcarving Masterclass on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. First a pencil, then a gouge. He would not let me skip it and neither will I. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. Honed steel hides a great deal of inexperience. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

I care about the order because I have watched what happens without it. The shopping is fun, the tracing is easy, and the drawing gets postponed for life. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. It looks like a copy because it is one. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 619 lessons and 3,039 video parts. It is the same road he walked me down, only you can walk it at your own speed.

Your first month of Woodcarving Masterclass, honestly

Let me be exact about this. The first month goes like so. Week one you draw. Nothing but a pencil, and it feels like a waste until it does not.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. Week four you finish something small enough to hold in one hand. Nobody's first leaf is any good, including mine. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

You will not be good in a month. Nobody is. Sharpening alone took me years to learn properly. Inside a year you will pass a lot of self taught carvers.

Something for you right now, whether you ever pay me or not

Let me hand you something useful before you close the page. Take whatever soft material you have and fix it to a board so it cannot slide. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. Shiny means you are there. A fuzzy surface means your bevel is rounded, and no new tool will fix that. More money on steel is the wrong answer nine times in ten.

The wood around Albany, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. More than four times the fight, for the same leaf. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

Enough about species. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Woodcarving Masterclass should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Not often. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

Two days beside me cannot do what two years at your own bench does. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Woodcarving Masterclass that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. It renews automatically every month, and you end it yourself in your account whenever you want. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Should cost be the real obstacle, be honest with yourself and wait. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Do the arithmetic, because it is not close. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. A wonderful weekend, and no Tuesday. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Woodcarving Masterclass

The spread is wider than any classroom I ever stood in. Some arrive with thirty years of woodworking and no carving at all.

Something should be said about what this does to your mind. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Watching a screen does none of this. Cutting toward a shape does all of it. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

We are a trade with standards, not a craft club. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. My own family could not have found the money if they had wanted to, and that is a thing I have never once forgotten.

So here is what I am really offering you. Not videos. The thing that made me, taken apart and filmed so it can reach your bench in Albany, TX. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

If you read all that and felt nothing, then carving is not your craft, and walking away is a perfectly good answer. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.