Learn wood carving at your own bench in Aledo, TX

I teach Woodcarving Tutorials online, and you can start with me tonight. You watch my hands from up close, you make the same cut on your own board, and you play it again if it went wrong. There is no address of mine in Aledo, TX and there never was. I can give you the one thing I needed most at sixteen and could not have bought at any price.

Somebody hands you a piece of lumber and something in you wants to cut into it. When you searched for Woodcarving Tutorials near Aledo, TX, you were hoping a real person would turn up. Have you watched a carving video, understood every word, and then made a mess of it at your own bench an hour later? Do you want to draw your own ornament instead of tracing somebody else's forever?

Then sit down, because I want to tell you something. My name is Alexander Grabovetskiy. I have carved for over forty years and I was named International Woodcarver of the Year. Put the award aside for a minute. What matters is how I got here, because it is the one thing standing between you and a carved leaf.

What I got at sixteen that you cannot buy in Aledo, TX

At sixteen I became the only apprentice of a fine-art master, the old European way, one student and one teacher at one bench. Not one page of theory came my way. He held my wrist and showed the angle. He kept using the word design until I was sick of hearing it. Not drawing, he would say, and then go quiet and let me sit with that for a while. He meant the laws of space, rhythm, repetition, and thinking like the tool in your hand. It took me about two years to hear what he was actually saying.

He built the carver I am. Nobody sells it near you, at any price. There are not enough masters left. The ones still working are carving, because carving is what pays, and teaching one student at a bench for years does not, so it has more or less stopped.

Then I lost the bench for a few years. I was arrested at eighteen for my faith. In prison I carved furniture with a knife I made myself, ten millimeters of steel, and a small gouge I made out of a nail. My pay was one boiled potato a day. One potato. I shared it with other men and we talked about God, and I got down under eighty pounds.

Sympathy is the last thing I am after here. A nail and a scrap of steel were enough, because somebody had already shown me how to hold them. Years later I landed in America on a Saturday and had a framing carpenter job by the Monday, with no English at all. Nobody there cared what I could carve. Give me a nail and a teacher's voice in my head and I can work.

Why the videos have not taught you to carve yet

You have been here before, I would bet. You found a video, you watched a man finish a beautiful leaf in nine minutes, and you understood every word he said. Then you sat down at your own board and it went wrong, and you could not say why.

What went wrong is not what you think. You were shown the RESULT of a cut. Nobody showed you the cut itself. Everything that mattered was under his hand. You cannot copy what you were not allowed to see. Every person who ever typed Woodcarving Tutorials into a search box was really asking for the same thing. Somebody to show them the cut properly, once, from the right angle.

A weekend class near you has the same hole in it, only more expensive. Eleven people, one pair of hands, one chance to see it. Then everybody drives home and works from memory, and memory is a liar about angles.

How I rebuilt that apprenticeship for you

So the lens now sits where he stood, over my own shoulder. You see the bevel, the grain and the chip lifting, blown up across your whole screen. And nobody sighs when you play it again. My master could not do that for me. He was one man with one afternoon. That is the difference between Woodcarving Tutorials on a screen and a master at your shoulder, and I have spent years closing it.

I teach it in the order he taught me, and I will not shuffle it to make it easier to sell. Design first, and almost nobody wants to hear that. Look at the Principles of Design in Wood Carving course and you will see what he meant about the laws of space.

Then carving, which is heavier work than people expect. You are digging inside the wood and removing mass, and your shoulders will tell you about it the next day. Then sharpening, which takes the longest to learn and which almost nobody teaches properly. A sharp tool makes a beginner look talented. Which is why a whole course exists on Carving Tool Sharpening, and not one buried video.

I care about the order because I have watched what happens without it. Tools, then tracing, and design gets skipped forever. Ten years later he can reproduce anything and design nothing, and he cannot understand why his work looks like a copy. He can cut anything and choose nothing. I would rather cost you one uncomfortable week of drawing than ten years of that.

Behind one login I have put 46 courses, 618 lessons and 3,036 video parts. Think of it as him standing behind you, except he never leaves.

Your first month of Woodcarving Tutorials, honestly

You should have the plain shape of it now. Week one you draw. Just drawing, and it is the week that decides everything after.

Week two you sharpen, and you find out that your tools were never sharp. Week three you make your first real cuts on a small board, and they will be rough. By the fourth week you have finished a piece worth keeping. You will see everything wrong with it. Do not throw it out. Keep it on a shelf, because in a year you will pick it up and see how far your hands have come.

Anyone promising you a shortcut is selling something. Sharpening alone took me years to learn properly. But a month of the real method puts you past years of guessing.

Something for you right now, whether you ever pay me or not

Before anything else, do this tonight. Any strip of hide, glued down flat. Rub honing compound on it, lay your gouge bevel flat, and pull the tool backwards toward you. Twenty strokes. Never push.

Now cut a curl in a piece of basswood. If it gleams, your bevel is true and you should hold onto that feeling. A fuzzy surface means your bevel is rounded, and no new tool will fix that. I have watched men buy four hundred dollars of gouges to solve a problem a piece of leather solves.

The wood around Aledo, TX, in one paragraph

Texas will hand you mesquite, pecan and live oak, and every one of them will fight a beginner. Pecan tests about 1,820 lbf on the Janka scale. American basswood is 410. You will push far harder to learn exactly the same thing, and your edge pays for all of it. So buy basswood for the learning years, and save the pecan for when you can do it justice. None of that is me being soft with you. A tool that goes dull in ten cuts will tell you that you have no talent, and it will be lying.

One paragraph is all the wood advice worth giving a beginner. Your problem was never which tree it came from. It is that nobody has ever stood behind you and shown you the first cut. That is the only thing I am actually offering, and it is the only thing Woodcarving Tutorials should ever have meant.

I do teach in person, and it is not enough

I still teach live a few times a year, and the Austin School of Furniture has hosted one of my classes. Face to face teaching still happens, and I love it. They sell out in about eight minutes, and even so I am telling you they are not the answer on their own.

I can fill your head in a weekend. Only repetition fills your hands. Repetition is the only thing that has ever made a carver, and repetition is exactly what an apprenticeship gives you and a workshop cannot. If you want Woodcarving Tutorials that actually changes your hands, you want the thing that repeats.

What it costs, and who should not join me

$25 a month opens all of it, and a year of Access is $200. Automatically renewed each month, and ended by you the moment you decide. A single good gouge costs more than a month with me, which should tell you where the money in this craft really goes.

Cash first, tools second, and I would rather say so than take it. Get a pencil and paper and draw leaves for six months. Drawing is free, and it is the part that matters most anyway. Saying that costs me a student and I will say it anyway.

Nobody wants to run this comparison, so I will. One weekend workshop is the tuition, plus the flight, plus two nights in a hotel, plus the days off work. And on Monday there is nobody left to ask. A year with me is $200 and I am there every Tuesday night in November when the leaf goes wrong and you cannot see why.

Who comes to me for Woodcarving Tutorials

Ages here surprise people. Woodworkers who want ornament, and men who just retired and finally have time.

And here is a benefit nobody mentions when they sell you a class. Carving in three dimensions builds new brain cells and works parts of your mind that drawing and painting never reach. Watching a screen does none of this. Cutting toward a shape does all of it. I train my body every day too, weights and walking, because I do not just carve wood. I carve myself.

Carvers are a real group with real standards, and I hold you to them. And part of what you pay leaves this school entirely. It funds orphans and widows, and it sponsors children with talent whose families cannot pay for art education. Nobody was paying for my education, and the talent sat there with nowhere to go for years.

So here is what I am really offering you. Not videos. One apprenticeship, which is the best way to learn this and always was. Start with the beginners course and one board of basswood, and carve something the size of your hand before you go near a door panel. If that sounds like your kind of work, shall we carve?

And if it does not, close this page with my blessing. This is slow, physical, expensive work that takes years, and I am not going to dress it up as anything else. But if you have wanted it since you were a boy, and nobody ever showed you how, then I know exactly where you are standing. I stood there too.