Alexander Grabovetskiy, woodcarver, School of Woodcarving · Published 2020
What does a wood carver mean by "spend too much time"?
Quick answer: In Venice Room 88.6 the phrase sits beside a note about the inner details of one section, with "a little later" before it. Other lessons put it beside approximately one millimeter, a painted project, some chips and a router plane.

The phrase sits in Venice Room 88.6, in a line about the details on the inside of one section, with "a little later" ahead of it. The same words show up in my other courses, beside a painted project, some chips and a router plane.
Ever finished a pass and known the spot would get another one? Did you wonder how long to stay there first? Then you know the place this part of workshop 88 sits in, as any wood carver does. We start with my own short video. After that, the phrase leads us through lessons from my other courses.
Six beats in this video
- A tool to fetch, and more cleaning.
- A shadow.
- A line that says the work is not at its end yet.
- Another movement on the inside, with a width to check.
- concave, concave, convex, convex: the plan for the shape, with a skew back bent and a straight tool as a maybe.
- A change of position.
- Cleaning, off camera, and the macaroni tool.
- Inner details, a little later, and a probable number seven.
What comes before the phrase in part 6?
The first words are "And let me get, again, a straighter tool." More cleaning follows, "Cleaning and cleansing." Shadow comes next, "And see how beautiful shadow it casts?" The line after it is "So that is pretty much what I'm after," and the whole stretch ends with "But that is not the end yet."
How wide is the movement planned for the inside?
On the inside, the plan is "another movement on inside, like this." A check follows, "Let me double-check. I've got probably a little bigger than half an inch." Then "actually pretty close," with "maybe 9/16" as the other figure, and the plan is to "shoot for half an inch." That half inch is 12.7 millimeters, and 9/16 inch is about 14.3 millimeters. Toward the point, "more narrow."
What shape does part 6 plan after the concave?
The shape has a plan too, "concave, concave, convex, convex, and that's going to go that way." Concave sits "on inside right here," and convex goes "this way." For a tool the plan is "a skew back bent." A straight tool is only a maybe, "a little bit and just shave it like that." The convex gets a size note, "It's not going to be really huge convex," and a limit, "not going to have a sharp transition right here."
A move comes with it. "I have to change the position and attack from this side."
Where does the cleaning go in part 6?
"That is the idea," and then "get the convex down." Cleaning waits, "it doesn't look clean yet. But about cleaning, I'll take care of it off camera another time." Next comes a tool, "let me attack right now on inside with the macaroni tool."
This passage holds the phrase. "And now it is much easier for me to get and clean a little better. And yes, I still have to clean this way, too. But again, I have to establish the details on inside of this section also a little later. So I really don't want to spend too much time if I don't have to."
A plan follows, "let's continue with the convex on inside." For it, "probably going to do a little bigger number seven," at "one inch" (25.4 millimeters).
What do parts 5 and 7 say about cleaning and roughing?
In part 5 the words are "I will take care of some of the rough spots" and, later, "clean it little more little later."
Part 7 has "closer I get to my future drop, lesser or smaller tools I should use." Near its end, "We're still in the roughing stage."
Where else does the phrase sit beside a flatter gouge?
Venice Room 85 is the first stop. In its fifth video the words are "probably a flatter gouge, like maybe number three," and "really close to the line." Then comes the size, "I'm leaving approximately one millimeter. No more than that." Right behind it the phrase finishes on "on it." One millimeter is about 0.04 inch.
A plan in Floral and Molding 11, third video, reads "a little later on, I'll clean that eye." Those words come ahead of the phrase, which closes with "at this point at least." Then a could, "I could actually excavate right inside with the 1 millimeter" (about 0.04 inch).
How does paint come into it?
Chamomile and Bow Rosette 4, second video: "I've done all of those petals and yes, I could spend a lot longer if I wanted to, but this project is going to be painted." Next comes the phrase, closing on "on that." A dome is the plan after it, "I'll take maybe number 7 and the bigger one, 20 millimeters or so" (about 0.8 inch).
A little sandpaper turns up in the second video of Acanthus over Moldings 9, "I used some of the Sandpaper just because like I said, it's gonna be covered with the paint." Ahead of "to clean my facets and so on which I don't usually use" sit the words of the phrase. Then "don't get an idea that I'm using some paper all the time."
What about an area under a flower?
An undercut shows in Venice Room 65, eighth video, "maybe I could actually undercut a little bit, which I don't need to." The next words are "I have to be wise." Straight after it the phrase turns up and finishes "in an area I don't need to."
A comparison follows, "we live in a different century right now, and people expecting everything done pretty quick." After that, "I don't have that luxury of what they had in 15th century," and "they could spend years in just one location."
A leaf and a plan for "a flower above" sit in Lily Box 3, tenth video, and the phrase closes on "on it." Next up is the worry, "just my middle line."
Does the camera matter here?
Cleaning is the subject in Venice Room 66, tenth video: "cleaning up later" and "probably off camera because there is no reason to spend time on that." Then "Absolutely no reason." Leading into the phrase are "At least I don't think I should," and it closes on "on it on the camera."
How does the phrase sit beside a drawing?
A drawing video, the first of Furniture Panel 13, has "Right now, it just doesn't look like it's supposed to be." Behind that line the phrase finishes with "rendering it." Later words are "just putting too many details at the beginning of the stage" and "I'm just doing the drawings."
What waits for a final shape?
In Furniture Panel 16 the seventh video has a macaroni tool, "number 23, or whatever." The final shape is for "later," and ahead of "right now cleaning 100%" come the words of the phrase. Also, "if I can save some time, probably should save some time."
A small tool shows in the first video there, "47, and that's a small. It's a 16th of an inch" (about 1.6 millimeters), and another, "one-eighth of an inch" (about 3.2 mm). Beside the phrase sit "cleaning it" and "I still have to develop the flowers."
What goes with a sharp blade and a router plane?
Tenth in that lesson, a sharp blade shows, "I have almost no pressure, but I'm controlling my tool because I really don't want to dig too deep." It lands between "it shaves perfectly" and "That's why I just do sometimes too aggressively." Later, "Just a little bit of shaving and I'm at the final depth."
Furniture Panel 15 has a router plane in the ninth video, "gives me a little resistance, and the reason why, because I'm actually a little too aggressive." Before "That is my final depth, and that's why it gives me a little resistance." the phrase lands. The tool is "number three, one-eighth of an inch, three millimeters."
What waits for a look later?
Chips show in the fifteenth video of Furniture Panel 19, "sometimes when you see really close, you see all those chips. It doesn't mean it's not clean." Ahead of "cleaning that all the way right now, because later on, I'm going to look at it and see what needs to be changed, what needs to be fixed" stands the phrase.
In that lesson's tenth video, "leave it like that. Okay?" is followed by the phrase, closing on "on it." For a tool the plan is "probably just number seven and a quarter inch" (about 6.35 mm).
Lily Box 3 returns in its third video with the words again, "Now it's just a matter of cleaning a little bit. Maybe with number seven." It ends on "right now," and "later on I can attack and clean that a little better" follows. Also "I like the overall movement, what I've just done."
Which video has a volute?
Floral and Molding 12 has a volute in video three, "I get really close to my volute." Those words close on "working on it." Then "let me clean up all around this section off-camera." The undercut gets a limit, "who knows, maybe I'm going to change something."
Why does older work look less deep?
Old carving is the subject of Lily Box 8, eighth video, "when you look at the historical work and you don't see that deep undercut". Then "It's just much quicker, and they've done tons of work, and people just didn't want to", and the phrase. Close behind, "they would get paid only after the work is done."
Roman Acanthus 16, second video, has "it's just a lot quicker not to undercut extremely. It wasn't by design. So it was just to save time because everyone wants to get paid." The line runs on after the phrase with "on the cleaning and go really deep underneath, nothing wrong with that."
Moldings are the subject of Venice Room 58, ninth video, "they would create the rough shape, and then they would create some shapes on inside that would distract from smoothness." Lines before that one carry the phrase, and "cleaning that" ends the last of them.
Can a carver say yes to the time?
Money comes into Lily Box 12, seventh video, "You can do underdo on purpose." After "if you really can't afford to," the phrase appears, and "if money depends on the speed and so on, you have to make the decision" follows. Then "that's a stopping point because I really need to pay my bills and so on." The verdict is "absolutely okay."
A huge piece comes into the fifth video of Venice Room 57, "Rotate the piece or walk around and attack from opposite direction. That would be smarter. Okay? Safer, I should say." It sits in "I just can't walk around," and the line ends. Later, "if I can save a minute, I'd rather save a minute, not to walk around." A limit follows, "Only if it's still safe, okay?"
Acanthus over Moldings 6, first video: right after "But like I mentioned previously if you already" comes the phrase, then "invested." Then the words "At the beginning when you establishing just the form and you decided to make it to the Perfection from the step number one, and then you see the mistake you I mean, that's just like a depression right?"
Grape Onlay 3, third video: "I prefer not to do the final cleaning until everything is done. Besides, maybe I'm not gonna like something and I will not change something." It follows "if I'm gonna change something, I'm gonna".
Venice Room 7, eighth video: "So now, what you see, it's not the final look what I'm after." Then "And I did not do that in 3D development because it just takes so much time, and I didn't want to", and the phrase.
Where did the phrase sit, video by video?
Next to these lines sit chips, paint, a router plane and a volute, plus a leftover of one millimeter, a leaf under a planned flower and a huge piece. Here is a run of it in one place. Each row names its video, so you can find the line from the lesson page.
| Video | What stood beside the phrase |
|---|---|
| This video, part 6 | details on the inside of a section, a little later |
| Fifth video, Venice 85 | a leftover of one millimeter, no more than that |
| Chamomile and Bow Rosette 4 | a set of petals, and a project to be painted |
| Acanthus Moldings 9, second video | facets, and some sandpaper used because of paint |
| Eighth video, Venice 65 | an undercut that is not needed, and flowers over the area |
| Lily Box lesson 3, video 10 | a leaf with a flower planned above it, and a middle line |
| Venice 66, tenth video | cleaning up later, and probably off camera, with no reason to spend time |
| Panel 13, first video | a drawing, and a note on too many details at the start of a stage |
| Seventh video, Panel 16 | cleaning at 100% held back while the final shape is for later |
| Panel 16, tenth video | a sharp blade, an aggressive pass and a final depth |
| Ninth video, Panel 15 | a router plane, some resistance and a final depth |
| Fifteenth video, Panel 19 | chips on a background, and a later look at what to fix |
| Seventh video, Lily Box 12 | money that depends on speed, and a stopping point |
| Venice 7, eighth video | 3D development left out, and a final look still to come |
| Acanthus Moldings 6, first video | perfection from step one, and then a mistake seen |
Which spot on your own piece could wait? Does a flower, a coat of paint or a final shape sit over it? Part 6 waits inside one tuition plan with the rest of Part 8 of the Venice Room.
How it's done
- A tool to fetch. A straighter tool is the first thing named in part 6.
- A shadow to look at. The shadow is called pretty much what is wanted, and the work is not at its end yet.
- Another movement, to check. The check lands near a half inch (12.7 mm).
- A change of position. The position changes, and the attack comes from "this side."
- Cleaning, off camera. Cleaning is for another time, off camera.
- Inner details, a little later. Probably a number seven at one inch (25.4 mm).
Frequently asked questions
Where is the cleaning put in part 6?
Cleaning gets two homes in part 6: off camera, another time, and a later pass for the inner details. Part 7 sits in a roughing stage near its end, and part 5 holds a plan for some rough spots and to clean a little more, a little later.
What width is set for the movement inside?
The target is a half inch (12.7 mm). The check reads a little over that, with 9/16 inch (about 14.3 mm) as one figure named.
Which tools are named for the convex in part 6?
A straight tool is a maybe, and a macaroni tool is named for attacking the inside. Probably a number seven, one inch (about 25 mm), is in the plan for the convex on the inside.

About the author
Alexander Grabovetskiy
Master Wood Carver · Founder, School of Wood Carving
Alexander Grabovetskiy is a master wood carver, named International Woodcarver of the Year. He carves classical relief the old way, from acanthus leaves to full Baroque ornament. He started the School of Wood Carving, a nonprofit, to hand these skills to anyone ready to pick up a gouge.
What to carve next
